• Home
  • Recent Images
  • Galleries
    • Astro-Images
    • Infrared
    • Events
    • Travel
    • DIY
    • Weather
    • El Paso Photos
    • Nature & Wildlife
    • Landscapes
    • CNC
    • Recent Images
    • Production Videos
    • Slideshow
    • Sunsets
    • Guest Book
  • Astrophotography
    • Color Widefield
    • Monochrome Images
    • Barnard Dark Nebula
    • Solar System
    • Star Fields
    • Scenics
    • Collaboration Images
    • Comet, Asteroids & More
    • Satellites
    • Equipment
    • Annular Eclipse of 2012
    • Venus Transit 2012
    • 2017 Eclipse
    • Planets
    • Infrared Astro
    • DSLR Astro
    • Losmandy G11 vs. GM8
    • GM-8 Gemini I
    • Lunar Eclipse 2021
  • Infrared
    • Monochrome IR
    • Abandoned
    • Panoramas
    • IR Travel
    • Color IR
    • Filter Tests
    • Science
    • Still Life
    • 5DII
    • Lens Tests
    • Cactus
    • Norway 2016
    • Macro
    • Glen Rose
    • North Texas IR
    • IR Fireworks
    • Brokenbow
  • Search
  • Guest Book
  • Contact Me

a collection of photos by Eric Chesak

www.ericchesak.com

  1. Galleries
  2. DIY

Heat Treating

Read More
  • First Layer

    First Layer

    It's really important to make sure that the parts are fully covered with the boric acid. When the uncovered areas are heat treated, there's a lot of work needed after the fact, to clean them up.

  • Boron flame

    Boron flame

    My boric acid covered heat treating tray burning off the alcohol. It's not necessary. But if the boric acid is wet with alcohol when it's placed in the forge, it tends to shoot the green flames out the front of the forge.

  • Cool flame, nice music

    Cool flame, nice music

  • After the Burn

    After the Burn

    This is how my tray looks with the alcohol burned off. The exposed areas were a problem in this heat treat.

  • Seems to be working OK

    Seems to be working OK

    My little heat treating forge made with cement board (for tiling in wet areas). Mot as insulating as fire brick or silica, but still allows me to get plenty hot.

  • Took 2 torches

    Took 2 torches

    Might open the hole slightly, to better fit the 2 torches.

  • Whoops!  Plastic

    Whoops! Plastic

    I've used this jar many times for quenching small parts. But clearly this was too much for my plastic jar. I caught it before it generated a mess.

  • New quench tank

    New quench tank

    This works better than plastic. It's also filled with vegetable oil. It has a higher flash point, which doesn't flare as much as motor oil. It also smells better.

  • Those are Hot!

    Those are Hot!

    Fairly uniform heating. The cooler front is a result of pulling it out of the forge for a photo.

  • Another view

    Another view

  • Decarburization

    Decarburization

    This shows the benefit of the boric acid coating and what happens when it's not fully covered. The scale affects the surface substantially, to the point where refinishing is needed. So isolation from oxygen is essential. Lots of work to fix this.

  • After quench

    After quench

    This is how it looks after quenching in the vegetable oil. I can already see some exposed parts :-(

  • Careful - Sharp!

    Careful - Sharp!

    As I found out, the glaze shards from the boric acid is very sharp. Think razor blade sharp. So better to use pliers than fingers.

Unless otherwise noted, all Photos, Images and Videos are Copyright C. Eric Chesak
Unauthorized use is prohibited

Pageloads
create counter
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2022 SmugMug, Inc.
    Seems to be working OK
    Took 2 torches
    Whoops!  Plastic